Copley Controls Corp. is a worldwide leader in high power amplifiers and high performance motion solutions for OEMs in the semiconductor, medical, pharmaceutical and automated assembly/inspection industries. Headquartered in the US with a division in England, Copley Controls has 20 years of experience in OEM partnerships. Our global commitment is backed with sales offices and local technical support in the US, Europe and Asia.  | | Copley Controls Corp. 20 Dan Road Canton,MA 02021 USA Main: 781-828-8090 Fax: 781-828-6547
Submit a request for
information to this vendor by clicking below: 
|
Product Newswire for Copley Controls Corp. 
I/O Module facilitates integration with CANopen network.Nov 6 2006 - With plug-and-play functionality, Model CAN-IPM-01 lets OEMs integrate various external sensors and actuators into their distributed motion control system with appropriate I/O interfaces and preferred form factor and connectors. Board-mounted CAN I/O processor module has nine configurable 8-bit DIO ports, 12 analog ports that convert 0-3 Vdc signals into 12-bit values, 12 PWM outputs, 8 digital inputs for CAN node address and bus bit rate, and 2 outputs for CAN bus status.
Linear Motors double pick-and-place efficiency.Oct 26 2006 - Equipped with 2 independent load-positioning Forcers, each controlled by its own Xenus Micro controller, direct drive ServoTube linear motors enable pick-and-place to positioning 2 items in time usually required for one. Multiple forcers run on single rail bearing and pick twin objects with one center-to-center distance and then place them elsewhere at different center-to-center distance. Forcers develop up to 80 lb peak drive force and 3 m/sec peak velocity each.
Control Sub-System provides fast response positioning.Aug 4 2006 - Offering drop-in replacement for ballscrew and pneumatic positioners, Sub-System consists of direct drive ServoTube actuator, driven by Micro Xenus controller, which develops 10 A peak output and operates on 120-240 Vac. Actuator requires no external encoder for position feedback, and its magnetic circuit enables integral solid state sensor to provide 12 micron repeatability. Sub-System develops velocity to 3.8 m/sec and peak drive force to 87 lb.
Panel-Mount Servo Amplifier offers seven operating modes.Jul 5 2006 - Suited for controlling AC brushless and DC brush motors, XSJ series Micro Xenus amps are compatible with various command signal sources and accept step-and-direction commands. They run on 100 to 240 Vac, 50/60 Hz and come in 3 models that cover 2, 6, and 10 A peak power ranges. Single amp can be used for various stand-alone and network-controlled applications. Series offers several motion control modes and works with feedback from position, velocity, and commutation signal sources.
View all product newswire for Copley Controls Corp.
|
|
|
|
|
|
|
|
|