Beckhoff Automation provides advanced, open automation products based upon proven industrial technologies so that customers can implement high performance control systems faster and at a lower overall cost than traditional PLC and motion control systems. Beckhoff's "New Automation Technology" product range includes PC based control, industrial PCs, automation controllers, operator interfaces, I/O, servo drives and motors. Sales and service are handled directly, with no intermediaries involved to provide faster response and improved communications.  | | Beckhoff Automation 12150 Nicollet Ave. S Burnsville,MN 55337 USA Main: 952-890-0000 Toll-free: 877-TwinCAT Fax: 952-890-2888
Submit a request for
information to this vendor by clicking below: 
|
Product Newswire for Beckhoff Automation 
Embedded PC suits automation and control applications.Dec 21 2007 - Model CX1010 Embedded PC is modular, DIN rail-mounted industrial PC with 500 MHz Pentium® MMX-compatible processor. Mid-range, EtherCAT-ready system features built-in Ethernet connectivity and PC/104 interface, which is available on both sides of device. Core CPU module, at 57 mm wide, offers 256 MB of internal RAM and 64 MB Compact Flash Card, and is available with Windows CE or Windows XP Embedded. Fanless computer utilizes heat sink for cooling.
Embedded PC comes with Windows CE OS.Nov 26 2007 - Equipped with TwinCAT automation and control software, Model CX9010 features Intel® IXP420 processor with XScale® technology and 533 MHz clock frequency. It has main memory (RAM), NOVRAM, and one switched Ethernet port with 2 external RJ45 interfaces. Additional DVI/USB or serial RS232/RS422/RS485 interfaces are available. Solid state device includes internal flash memory as boot and memory medium and heat sink for cooling.
Coupler acts as gateway between I/O terminals.Nov 21 2007 - Acting as bridge between company's original Bus Terminal I/O line and high-speed EtherCAT Terminals, Model BK1250 converts EtherCAT's E-bus signal so data can be passed over original I/O terminals, all on same node. EtherCAT protocol can process 1,000 distributed I/O in 30 µs or 100 axes in 100 µs using twisted pair or fiber optic cable.
Embedded PC is DIN rail mounted.Nov 8 2007 - Model CX9010 features Intel IXP420 processor with XScale technology and 533 MHz clock frequency. As solid state device, it features internal flash memory as boot and memory medium and heat sink for cooling. In combination with Beckhoff Bus Terminal I/O or EtherCAT I/O Terminals, PC becomes compact PC controller for PLC and motion control applications. Unit is equipped with Windows CE operating system and TwinCAT automation software.
View all product newswire for Beckhoff Automation
|
|
|
|
|
|
|
|
|