With quickness and ease, you can now control your Altivar 31 Drives from a DeviceNet Master device with this DeviceNet Option Card. The process is simple.

• "No Tool" Installation: option card and bracket snaps inside the drive
• Standard Open Style 5 Pin external DeviceNet connection: easily connect the AV31 to a DeviceNet network
• Hardware or Software MacID and Baud Rate Configuration: can set though 6 MacID switches and 2 for the baud rate or configure over DeviceNet
• Complies with ODVA Standard DeviceNet drive with the AV31
• No complicated configuration: only 2 configuration parameters (MacID and Baud Rate)
• The card fits inside the drive behind the door

Instant DeviceNet is the answer to instantly removing all software problems that come with enabling DeviceNet. This product was designed with the vendors in mind that do not want to spend a fortune getting into the DeviceNet market and also in mind of those who are already in the market, but want to lead the race. This solution is the fastest, lowest cost and least risky way to enable DeviceNet on your product. There is absolutely no software integration or application software needed. Simply put the chip down, connect your I/O points, do very little configuration, and you will have a complete, fully guaranteed to pass ODVA certification, DeviceNet device.

Kalki Substation Gateway (KSG) family of products provides patent pending protocol conversion capabilities for substation and distribution automation requirements. Support IEC 61850, DNP3, Modbus, IEC 101, IEC 104 and a host of proprietary protocols, with support for one-to-one, one-to-many and many-to-many conversions and transparent channel support for connecting device engineering tools through the gateway to configure the end device, KSG family product substation modernization and migration opportunities like never before.

The Mu-4000 Security Analyzer platform identifies & documents Industrial Control Systems safety concerns in any IP-based system, application or network device without requiring access to any source code. Users: * Process Control or SCADA Control Product Selection, benchmarking * Security profiling of new releases as part of safety control process * Patch verification and configuration-specific testing * Policy change verification * Auditing of network security devices and applications * Internal application security testing For Product Developers: * Creation of security, robustness and resiliancy profiles * Pre-release certification of SCADA and Process Ctrl products * Comparative testing across releases, patches * Automate customer-supplied tests & scripts

HMS has developed this PCI solution based on the high performance / high volume embedded Anybus Master and Slave interface range. As a result HMS can offer a very competitively priced PCI solution with the high performance and interchangeability of the Anybus range. Added to this is the comprehensive configuration software "Anybus NetTool," designed to configure your Profibus or DeviceNet network. Typical applications for Anybus-PCI cards are embedded PCs and PC based PLCs, CNCs and Robot controllers, as well as HMIs and intelligent visualization systems. Some of the features are: Common API used for all Anybus PCIs - one driver for all buses; Galvanically isolated fieldbus interface; Free OPC Server.

Anybus Communicator can connect almost any product with a serial RS-232/422/485 communication interface to Fieldbus and Industrial Ethernet networks. The Communicator performs an intelligent conversion between the serial protocol and the chosen industrial network. The translation between the serial protocol and the network is configured by using the software "ABC Config Tool." Once you have completed your configuration for one network, you are able to re-use this configuration for all other supported Industrial Networks. Some of the features are: Max 512 bytes of Input data & 512 bytes of Output data - Protocol modes: Master and Generic data modes - Built-in macro for Modbus RTU Master - Line Listener to analyze serial telegrams on the sub-network.

The Anybus X-gateway family is a product line consisting of over 150 different products aimed to connect almost every possible combination of two industrial networks. The product family supports 17 different Fieldbus networks such as Profibus, DeviceNet, CANopen and CC-Link as well as Industrial Ethernet versions. There are currently 3 Master/scanner versions, ASI, DeviceNet and Profibus. The X-gateways are designed for use in Industrial Automation plants where increasingly many different Fieldbus networks are used. The X-gateways help System Integrators to easily interconnect any two networks, enabling consistent information flow throughout the entire plant.

Phoenix Contact Inc. provides industrial automation, interconnection, and interface solutions to manufacturers worldwide.

Rockwell Automation is a leading global provider of automation, power, control, and information solutions that help manufacturers achieve a competitive advantage in their businesses.

The VersaMax product family can be used as I/O, as a PLC, and as distributed control for up to 4096 I/O points. With its modular architecture, intuitive features, and unparalleled ease of use, it helps save machine builders and end users time and money. VersaMax is the first GE Fanuc control product created using the unique Six Sigma design process. Six Sigma combines global research and development techniques, extensive customer needs analysis, and rigorous quality control standards. The VersaMax I/O and Control product family features a broad selection of I/O modules, terminations, power supplies, and network interface options to enhance your control capability.

The Series 90-30 PLCs are a family of controllers, I/O systems and specialty modules designed to meet the demand for versatile industrial solutions. With a single overall control architecture and modular design, the Series 90-30 has been the PLC of record in over 200,000 applications, such as high speed packaging, material handling, complex motion control, water treatment, continuous emissions monitoring, mining, food processing, elevator control, injection molding, and many more. One reason for the versatility of the Series 90-30 is the large variety of discrete and analog I/O modules (over 100 modules), as well as specialty modules, that are available.

GE Fanuc’s Series 90-70 PLC provides a comprehensive solution that is equal to the most demanding applications. With our CPX family of CPUs, the Series 90-70 offers more for your automation dollar–more computing power, more memory for your applications, and more communications and redundancy capabilities. And with a wide range of isolated and high-density VME analog I/O modules, the Series 90-70 provides even more flexibility for a variety of applications. Open architecture based on the VME-bus standard; Redundancy for critical applications when combined with Genius I/O – Genius Modular Redundancy (GMR) systems and Hot Standby systems; A wide variety of communications options including Ethernet TCP/IP, reflective memory, Genius LAN and serial communications modules

OC-8 SERIES: POWERFUL, GENERIC, MINIATURIZED NETWORK ENABLER Open source embedded controller for easier and more powerful network enablement Open Controller OC-8 series of embedded controllers simplifies the connection of machines, devices and systems in a network for real time communication and interaction. It shortens time-to-market in the development of new products. Existing products benefit by adding secure network capabilities. The pin and function compatible modules are used in a wide variety of applications. Open Controller meets the need for faster development, reuse of knowledge and sustainable solutions. A complete tool chain, source code and examples accelerate the implementation. High tech The high tech modules use an ARM7 or ARM9 (400 MHz) microcontroller

The AMCI absolute SSI rotary shaft encoder is a new addition to the DuraCoder product family. Utilizing the DuraCoder's resolver based sensor technology, this rotary encoder provides unique position data output in relation to the shaft position, with up to 4096 counts per turn. An available multiturn version allows for up to 4096 counts per turn over 4096 turns. Synchronous Serial Interface (SSI) has been widely accepted for its high throughput, high accuracy and faster response than other means of connecting sensors. All of these products, including the SSI DuraCoders, connect to AMCI’s SSI interface modules or network based interfaces for easy integration into a machine’s automation architecture. Other features include Reset to zero and Increasing Count direction inputs. An optional reset button allows the Multiturn SSI DuraCoder’s data to be zeroed without the use of any additional programming equipment or wires. Every SSI DuraCoder can also communicate over a RS485 link. This functionality includes the ability to both read position data from, and write setup data to, the DuraCoder. Single Turn DuraCoders can be programmed for any value between 2 and 4096 counts per turn. Multiturn DuraCoders can be programmed with Number of Turns and Full Scale Count parameters. The Number of Turns can be programmed to be any power of two between 1 and 4096. The Full Scale Count can be programmed to be any value between (Number of Turns) and (Number of Turns * 4096).