Start Over
Apply filters below to narrow your search results instantly:

Type

Desktop
Desktop or Wall Mount
Handheld Industrial Computers
Panel Mount
Portable Industrial Computers
Portable or Rack
Portable/Convertible to Tablet PC
Rack Mount
Rack or Panel
Wearable Industrial Computers

Displaying: 1 To 17 of 17

Stratus ftServer systems are for manufacturing organizations with mission-critical applications that must always be protected against downtime and data loss. Each system delivers continuous application availability using purpose-built fault-tolerant hardware, failsafe software, and customer care services that together provide a complete solution unmatched by any other vendor.
ULTRA is Interweigh's new Touch Screen Industrial XP Computer System. Originally conceived as an industrial computer, the Ultra can fill a variety of diverse roles. Our stainless steel model features a Perma Shell enclosure that will last and look good for many years and is suitable for food processing deployments.
The E9 Series chassis is a very high performance design in a 2U rackmount enclosure. Feature rich, the E9 Series is a solid, robust design which will meet the most rigorous and demanding requirements. This chassis is ideal for high density I/O intensive applications requiring high drive availability. The E9 provides four front panel hot swap drives (models for SATA, SCSI, or EIDE), two externally accessible 5-1/4 inch and one internal 3-1/2 inch drive bays. The hot swap drives can easily be configured for a large RAID. The chassis is cooled by four 80mm 42CFM ball bearing fans. Air flow is in through the front. The fans are mounted mid-chassis to help cool the drives.
Fully sealed aluminum/plastic enclosure without ventilation slots and external fans susceptible to failure makes the 15" industrial touch panel PC suitable for multi-functional use in challenging environments, such as those found in industrial production or logistics. Its robust and reliable design provides effective protection from not only a wide range of mechanical and chemical conditions but also extreme environments. The C15 is fully protected against splashed water and is equipped with shock and vibration resistant components, such as industrial locking connectors.
The noax C8, with its very robust aluminum enclosure, fully sealed design without ventilation slots or external fan susceptible to failure, was specially developed for mobile use under extreme conditions. Its very small size and varied mounting possibilities allow it to be placed in almost any vehicle. The 8.4" TFT display with integrated touch panel and automatic brightness control that can be used in daylight offers a wide range of indoor and outdoor applications for warehouse or supply chain management, and data acquisition. All this combined with the simplest possible operation.
The ATXP-965Q is a long-life industrial motherboard with dual-core processor technology and PCI Express. Powered by the Intel Core 2 Duo E6400 or E4300 processor and the Intel Q965 Express chipset, the ATXP-965Q Industrial Motherboard was designed specifically for performance-intensive industrial applications such as Medical Devices, Security Systems, Imaging, Industrial Automation, and Communications. The ATXP-965Q Motherboard supports six (6) Serial ATA connectors (300MB/s) for high-speed hard disk drives, ten (10) USB 2.0 ports, one (1) or two (2) PCI Express-based 10/100/1000 Ethernet ports, Intel High Definition Audio, and onboard Intel Graphics Media Accelerator 3000. Includes five (5) 32-bit PCI slots for legacy devices, one (1) PCI-Express x16 and one (1) PCI-Express x4.
Industrial Touch Screen Computer. Completely sealed unit to IP54.
Long Life Industrial Motherboard Intel Pentium 4 Processor with Hyper-Threading Intel 875P Chipset 800 MHz Front Side Bus Up to 4GB of Dual Channel DDR 400/333/266 64-bit PCI-X Serial ATA (150 MB/s) AGP Pro 8x/4x Five (5) to Eight (8) Year Guaranteed Production
Long Life Industrial Motherboard Intel Pentium 4 and Celeron D embedded processors Intel Pentium D commercial processors Intel 945G Express Chipset 800/1000 MHz Front Side Bus Dual PCIE Gigabit Ethernet Options Up to 4GB of Dual Channel DDR 667/533/400 Quad Serial ATA II (300 MB/s) RAID Two (2) or six (6) Serial Ports PCI Express x16, x4 Five (5) to Eight (8) Year Guaranteed Production
4U Rackmount Intel Dual Core Pentium 3.4GHz Integrated System
The VT248 dual PowerPC™ VME card delivers an outstanding combination of computational and I/O performance in a industry standard form factor. On its own or as part of a multiprocessing system, the VT248 is a powerful engine for embedded computing in industrial, military and commercial applications. The VT248 utilises two third generation PowerPC™ G4+ CPU's - the Motorola MPC7448. This device has a highly advanced superscaler architecture to delivering exceptional integer and floating point performance. The PowerPC™ G4+ benefits from a highly efficient 167MHz system bus and an AltiVec™ 128 bit vector processing engine which can perform four single precision floating point operations per clock cycle. Performance is further enhanced by 1MByte on chip cache running at full core speed. The MPC7448 is available with clock speeds up to 1.7GHz. The VT248 is available with dual Gbit Ethernet ports, dual PMC sites, dual serial ports and up to 1GByte of external SDRAM.
Supports 65nm Intel® µFC-PGA 478 / µFC- BGA 479 Core™ 2 Duo / Core™ Duo / Celeron® M CPU Intel® 945GME / ICH7-M Chipset One 200-pin SODIMM supports up to 2 GB DDR2 400/533/667 SDRAM Dual Gigabit Ethernet 1 CF, 1 COM, 3 USB Supports 2.5" SATA HDD
The Symbiont Boot Appliance (SBA) is a rackmount appliance that boots up stateless devices with no internal operating system or embedded software and connects them to virtually any application or terminal server. The result is a desktop environment that requires minimal maintenance, is very easy to deploy, requires no third party desktop management software, and is extremely secure. You can manage your network remotely through a web browser using a secure (SSL) connection. Supported terminal services protocols include: Windows Terminal Services (RDP), Citrix (ICA), LDM (X over SSH), VNC, Unix (XDMCP), IBM 3270, IBM 5250, Telnet, NoMachine (NX) and virtually any midrange, mainframe, or other legacy system. Thin clients can also boot to a local kiosk-style Java-enabled web browser.
Classic 4U chassis is only 18" deep. Ideal for 24" deep rack mount cabinets. Up to 3 front accessible drives and 2 internal drives. Choice of AC or DC input power supplies. Rugged, reliable and practical 14-slot industrial computer for 19" racks with Air Chamber (C) optimized air flow and built-in temperature control for longer life of your system. The high quality chassis is precision designed and manufactured with CAD-CAM robotics in our own Metal Shop. We have total control of air flow, electrical and EMI protection. *All Gloria chassis can be supplied with a 14 slot passive or active backplane or low cost motherboard *High quality, solid steel chassis that is resistant to corrosion and vibration *Excellent EMI protection to meet FCC class B, has C-UL and CE approved power.
Best low cost chassis for 20 slot backplane or motherboard. Up to 5 front accessible drives and up to 9 internal drives. Choice of 43 CFM or 62 CFM air fans. Choice of power supplies: AC - 300W, 400W, 700W or dual 400W and quad 800W hot swap power supplies. DC input power also available: 12V, 24V, 48V, 125V, 250V.
Designed for use in power utilities, industrial process control and automation, the TR-5001 Panel PC can be configured with a variety of power supply options: 110/220 VAC or 12, 24, 48, 125, 250 VDC. Operating temperature range of the TR-5001 is 0°C to 50°C. This high performance panel mount computer will accommodate Intel Pentium 4 or Celeron processors up to 3.6 Ghz and up to 2GB DDR memory. Dual LAN with Intel Pro1000+. Other features include slim CD-ROM*, RS-232 and RS-485 serial ports, printer port, up to 4 USB 2.0 ports, solid state disk or hard drive. Two hard drives can be included with optional RAID1 ATA/100 controller for redundant operation. Slim DVD-ROM/CD-RW drive option available.
New NEMA 4 rated panel PC model TR-5190 has a larger 19" Samsung LCD screen with resolution of 1280 x 1024 and available resistive touch screen (Windows, Linux, QNX Drivers). It is powered by reliable telecom grade single board computer with Intel P4 processors up to 3.6GHz with 800 front side bus. It includes 2 ISA slots and 4 32-bit PCI slots. Input power options include 110/220 VAC and 12, 24, 48, 125 and 250 VDC.

Displaying 1 To 17 of 17