TAGSYS Folio HF Tags by TAGSYS RFID Group Inc.

TAGSYS low cost, ultra-thin, flexible high-frequency (HF) RFID inlays and labels are designed to meet a wide range of application requirements. Folio tags are available as converted labels or inlays. From IC to antenna to final tag design, the Folio product line has been designed for optimal performance in a variety of environments. Whether the product to be tagged is paper or plastic, there is a Folio product to meet your application requirements. For maximum flexibility the Folio product line is offered in both pressure-sensitive adhesive labels and non-converted inlay formats. TAGSYS pressure-sensitive adhesive labels are printable and can be used directly within customer applications. Non-converted inlays are designed to be integrated into specialty labels.

IntelliPort - RFID Portal by AutoCrib Inc.

The IntelliPort is a turnkey RFID system located at a choke point, in order to track material tagged with RFID labels in and out of a controlled area. Equipped with an RFID Reader and multiple RF Antennas, the IntelliPort uses Class 1 Gen 2 RFID Technology. The Gen 2 tags permit the user to assign the serial number at the point of print, saving time and money. The IntelliPort contains magnetic and photo beam sensors combined with surveillance web cameras to offer security and accountability. Existing storerooms or tool cribs can easily add an IntelliPort, which supports barcode, magnetic swipe and proximity card input for access. IntelliPort connects to the same Ethernet network as existing AutoCrib equipment.

M100-i Active RFID Tag by RF Code

M100-i tags are equipped with on-board infrared sensors which monitor their environment for incoming IR signals and periodically report their unique ID and IR location codes. These combined data points allow for the rapid location of tagged assets with room-level accuracy. By using its motion sensor, the tag conserves battery power when an asset is at rest and beacons more frequently once the asset is moved.

OEM Reader Module TLM-30 by TECTUS Transponder Technology GmbH

The TECTUS TLM-30 reader modules are multi-functional, fully integrated low cost reader modules at DIL-16 dimensions. The TLM-30 needs just an external antenna to read and write multiple low frequency transponders by using its internal demodulator. The TLM-30 firmware can be field-updated by the user via its serial interface. Multiple firmware versions can be downloaded via the Internet. With external demodulators, the TLM-30 could be used to build multi-tag and multi-modulation readers (ASK, PSK, FSK) and overcomes limitations given by other reader modules.

• Short-range reader, by connecting the Antenna direct to OUTDRIVE, INHIGH connectors at the TLM-30
• Up to mid-range reader by using external amplifiers und demodulators
• Adding of external amplifiers for higher performance via TXSIG
• External demodulators to increase sensitivity via INLOW
• Synchronization of multiple readers via SYNC
• 3 free configurable I/O ports, eg. LED / buzzer
• No crystal needed (int. resonator), external clock can be added via CLOCK
• 3,3 V and 5V input
• Programmable offline functionality via C-interpreter
• Firmware updates via serial interface (loader required)
• Application specific firmware versions (ASF) available over Internet
• Full customized firmware possible on volume demand
• Signal amplitude measurement to measure the signal strength
• Command timing at the air interface is adjustable by parameters
• Synchronous demodulation

pcProx Proximity Card Readers by RF IDeas Inc.

Use your existing building access ID badges for measuring employee productivity, quality, access to factory kiosks, dispensing equipment and more. RF IDeas manufacturers compatible proximity card readers (USB and Serial port) and offers solutions for solving issues (employee productivity, help desk costs, and password management to name a few) associated with login, computer access control.